Nikon Speedlight SB-700 User Manual

H–7
Tips on Speedlight Care and Reference Information
H
Tips on Speedlight Care
Cleaning
Dirt on the flash panel can cause it to break when the flash is fired. •
Clean the flash panel regularly.
Use a blower brush to remove dirt and dust from the SB-700 •
and clean it with a soft, clean cloth. After using the SB-700 near
saltwater, wipe the flash unit with a soft, clean cloth moistened
slightly with plain water to remove the salt, then dry it using a dry
cloth.
On rare occasions, the LCD may turn on or go dark, due to static •
electricity. This is not a malfunction. The display will soon return to
normal.
Do not drop the SB-700 or hit it against a hard surface, as this may •
damage its precision mechanisms. Do not apply strong pressure to
the LCD panel.
"
WARNING
Never use thinner, benzene, or other active agents
when cleaning the Speedlight, as this may damage
the Speedlight or cause it to catch fire. Using these
agents may also impair your health.

Nikon Speedlight SB-700 Specifications

General

Vari-Power	1/1 to 1/128
Type	Shoe Mount
Color Temperature Information Communication	Yes
LCD Panel	Yes
Guide Number	28 m/92 ft at ISO 100 (35mm)
Zoom Range	24-120mm
Flash Duration	1/1042 sec at full power
Exposure Control	i-TTL
Bounce Head	Yes, -7 to 90 degrees
Swivel Head	Yes, 180 degrees left or right
Power Source	4 x AA batteries
Weight	360 g without batteries
Recycle Time	2.5 sec (NiMH)
Flash Modes	TTL, Manual, Repeating
Wireless Operation	Yes; Commander and Remote modes