Nikon Speedlight SB-700 User Manual

D–3
Wireless Multiple Flash-unit Photography
D
SU-4 type wireless multiple flash-unit photography
The Speedlight mounted on the camera or the camera’s built-in flash •
can be used as the master flash unit.
The SB-700 can only be used as a remote flash unit.•
Be sure to cancel the master flash unit monitor pre-flash function or •
select a master flash unit flash mode that does not activate monitor
pre-flashes.
The flash mode is set on each flash unit. Set the same flash mode on •
each remote flash unit.
Remote  ash units Master  ash unit
mounted on the
camera
Remote  ash units start  ring triggered by the master  ash
unit  ring (in AUTO mode or M mode).
Remote  ash units stop  ring when the master  ash unit
stops  ring (in AUTO mode).

Nikon Speedlight SB-700 Specifications

General

Vari-Power	1/1 to 1/128
Type	Shoe Mount
Color Temperature Information Communication	Yes
LCD Panel	Yes
Guide Number	28 m/92 ft at ISO 100 (35mm)
Zoom Range	24-120mm
Flash Duration	1/1042 sec at full power
Exposure Control	i-TTL
Bounce Head	Yes, -7 to 90 degrees
Swivel Head	Yes, 180 degrees left or right
Power Source	4 x AA batteries
Weight	360 g without batteries
Recycle Time	2.5 sec (NiMH)
Flash Modes	TTL, Manual, Repeating
Wireless Operation	Yes; Commander and Remote modes