Nikon Z 7 User Manual

295Menu Guide > B The Setup Menu
Adjust viewfinder brightness. If Auto is selected, viewfinder
brightness will be adjusted automatically in response to lighting
conditions; to adjust brightness manually, select Manual and
press 1 or 3 (choose higher values for increased brightness,
lower values for reduced brightness). Note that viewfinder
brightness can only be adjusted when the viewfinder is the
active display; it cannot be adjusted when the viewfinder is off
or in the “monitor only” monitor mode.
Use the multi selector to adjust viewfinder color balance as
described in “Monitor Color Balance” (0 294). Note that
viewfinder color balance can only be adjusted when the
viewfinder is the active display; it cannot be adjusted when the
viewfinder is off or in the “monitor only” monitor mode.
Adjust the brightness of the control panel. If Auto is selected,
control panel brightness will be adjusted automatically in
response to lighting conditions; to adjust brightness manually,
select Manual and press 1 or 3. Selecting Off turns the control
panel off.
Viewfinder Brightness
G button ➜ B (setup menu)
Viewfinder Color Balance
G button ➜ B (setup menu)
Control Panel Brightness
G button ➜ B (setup menu)

Nikon Z 7 Specifications

General

Camera Type	Mirrorless
Sensor Resolution	45.7 megapixels
Sensor Type	CMOS
Image Processor	EXPEED 6
Lens Mount	Nikon Z mount
ISO Range	64-25600 (expandable to 32-102400)
Continuous Shooting	9 fps
Video Resolution	4K UHD at 30p
Battery	EN-EL15b
Weight	675 g (body only)
Dimensions	134 x 100.5 x 67.5 mm
Weather Sealing	Yes
Sensor Size	35.9 x 23.9 mm
Shutter Speed	1/8000 to 30 seconds
Viewfinder	Electronic, 3.69 million dots
Screen	3.2-inch tilting touchscreen, 2.1 million dots
Autofocus System	493-point phase-detection
Image Stabilization	5-axis in-body stabilization
Storage Media	XQD card slot
Battery Life	Approx. 330 shots