Nikon Z 7 User Manual

350 On-Camera Flash Photography
When a flash unit that supports unified
flash control (an SB-5000, SB-500,
SB-400, or SB-300) is mounted on the
camera, the flash control mode, flash
level, and other flash settings can be
adjusted using the Flash control> Flash
control mode item in the photo shooting menu (in the case of
the SB-5000, these settings can also be adjusted using the
controls on the flash unit). The options available vary with the
flash used, while the options displayed under Flash control
mode vary with the mode selected. Settings for other flash units
can only be adjusted using flash unit controls.
• TTL: i-TTL mode. In the cases of the SB-500, SB-400, and SB-300,
flash compensation can be adjusted using the Flash
compensation item in the photo shooting menu.
• Auto external flash: In this mode, output is adjusted automatically
according to the amount of light reflected by the subject; flash
compensation is also available. Auto external flash supports
“auto aperture” (qA) and “non-TTL auto” (A) modes. See the
flash unit manual for details.
• Distance-priority manual: Choose the distance to the subject; flash
output will be adjusted automatically. Flash compensation is
also available.
• Manual: Choose the flash level manually.
Flash Control Mode

Nikon Z 7 Specifications

General

Camera Type	Mirrorless
Sensor Resolution	45.7 megapixels
Sensor Type	CMOS
Image Processor	EXPEED 6
Lens Mount	Nikon Z mount
ISO Range	64-25600 (expandable to 32-102400)
Continuous Shooting	9 fps
Video Resolution	4K UHD at 30p
Battery	EN-EL15b
Weight	675 g (body only)
Dimensions	134 x 100.5 x 67.5 mm
Weather Sealing	Yes
Sensor Size	35.9 x 23.9 mm
Shutter Speed	1/8000 to 30 seconds
Viewfinder	Electronic, 3.69 million dots
Screen	3.2-inch tilting touchscreen, 2.1 million dots
Autofocus System	493-point phase-detection
Image Stabilization	5-axis in-body stabilization
Storage Media	XQD card slot
Battery Life	Approx. 330 shots