Nikon Z 7 User Manual

335Connections
To upload pictures to a computer, connect the camera via a
wireless network or using the supplied USB cable.
Connecting via USB
If the supplied USB cable is used to connect the camera to a
computer running ViewNX-i, you can copy pictures to the
computer, where they can be viewed, edited, and organized.
❚❚ Installing ViewNX-i
Download the ViewNX-i installer from the following website and
follow the on-screen instructions to complete installation
(existing users should be sure to download the latest version, as
earlier versions may not support the camera). An Internet
connection is required. For system requirements and other
information, see the Nikon website for your region.
https://downloadcenter.nikonimglib.com/
Connecting to Computers
D Capture NX-D
Use Nikon’s Capture NX-D software to fine-tune photos or to change
settings for NEF (RAW) pictures and save them in other formats.
Capture NX-D is available for download from:
https://downloadcenter.nikonimglib.com/

Nikon Z 7 Specifications

General

Camera Type	Mirrorless
Sensor Resolution	45.7 megapixels
Sensor Type	CMOS
Image Processor	EXPEED 6
Lens Mount	Nikon Z mount
ISO Range	64-25600 (expandable to 32-102400)
Continuous Shooting	9 fps
Video Resolution	4K UHD at 30p
Battery	EN-EL15b
Weight	675 g (body only)
Dimensions	134 x 100.5 x 67.5 mm
Weather Sealing	Yes
Sensor Size	35.9 x 23.9 mm
Shutter Speed	1/8000 to 30 seconds
Viewfinder	Electronic, 3.69 million dots
Screen	3.2-inch tilting touchscreen, 2.1 million dots
Autofocus System	493-point phase-detection
Image Stabilization	5-axis in-body stabilization
Storage Media	XQD card slot
Battery Life	Approx. 330 shots