23
General Settings
User
Close down the system.
It is possible to turn off the entire system at once, i.e. ventilation, central heating and hot water.
You can close down the system in the programme setting menu.
• Standby You can close down the system from here.
Off: The system is switched off.
On: The system is switched on.
Event log (warning/alarm)
It is possible to review all events, warnings and alarms in the system that have taken place within the last 14 days.
The event log can be found in the Information menu:
• Event log/Browse log This displays all events within the last 14 days.
Explanation of the screen:
M stands for Master (Compact P).
Data about events outside normal operation
Warning
Alarm
(!) Active alarm (not reset)
Time of event
Event
To view event data in detail, click on an event (opens in a new screen).
To reset an event and remove it from the initial display page, click on
”Approve”.
To read input and output status at the time of the event, click on ”Log”,
and in this way the reason for any Warning or Alarm can often be seen.
Read alarmlist page 30.
• Event log/Acknowledge event log From here, you can approve all events/alarms at once.
• Event log/Events list sort mode You can sort the events/alarms displayed in the menu item ”View all events”.
TimDir/TimRev/AdrDir/AdrRev/→ TypeDir/← TypeRev
To Next Page
Loading...
Need help?
General