7
Control panel
Current operating conditions can be read from the control panel,
and new operating parameters can be set.
Navigation is by using the wheel and the return button under the
display.
Important! Do not press the wheel too hard when you turn it,
to ensure optimum functioning.
Navigation
Turn wheel to right/left
• Change main menu
• Navigate up/down in submenu
• Change settings values
Press ”OK” to enter a menu
• To approve a setting
• Press ”Arrow back” to return to the menu
• To leave a setting without approving a change
There is an USB plug at the base of the control panel.
This can e.g. be used for future software updates, or for data
logging.