ETSI safety guidelines
18
7368 ISAM CPE A-020W-A Product Guide
3FE-47511-AAAA-TCZZA Issue: 01
3.2.2 Energy-related products standby and off modes
compliance
Hereby, Nokia declares that the A-020W-A CPE devices are in compliance with the
essential requirements and other relevant provisions of Directive 2009/125/EC
together with Commission Regulation (EC) No 1275/2008 and Commission
Regulation (EC) No 801/2013.
The A-020W-A CPE devices qualify as high network availability (HiNA) equipment.
Since the main purpose of A-020W-A devices is to provide network functionality with
HiNA 7 days /24 hours, the modes Off/Standby, Power Management, and Networked
Standby are inappropriate.
For information about the type and number of network ports, see “A-020W-A
interfaces and interface capacity” in chapter 5.
For information about power consumption, see “A-020W-A detailed specifications” in
chapter 5.
3.2.3 EMC and RED compliance
The A-020W-A CPE equipment complies with the following EMC, EMI, and ESD
requirements:
• EN 300-386: Electromagnetic Compatibility and Radio Spectrum Matters (ERM):
Telecommunications Network Equipment; Electromagnetic Compatibility (EMC)
requirements; Electrostatic Discharge (ESD) requirements
• European Council Directive 2014/30/EU
• European Council Directive 2014/53/EU
• EN300328: Wide band transmission systems; data transmission equipment
operating in the 2.4 GHz ISM band using wide band modulation techniques
• EN301893: 5 GHz RLAN
• EN50385: Compliance of base station equipment with a radio frequency of
electromagnetic field exposure limits (110MHz-100GHz)
3.2.4 Equipment safety standard compliance
The A-020W-A CPE equipment complies with the requirements of EN 62368-1,
Safety of Information Technology Equipment for use in a restricted location.
Release 05.08.01 | June 2018 | Edition 01
To Next Page
Loading...
Need help?
General
