7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A
Issue: 01 3FE-47511-AAAA-TCZZA 87
3 Click Save.
4 STOP. This procedure is complete.
Procedure 33 NTP configuration
1 Select Application > NTP from the top-level menu in the Ethernet Gateway window, as shown
in Figure 38.
Figure 38 NTP window
2 Select the Enable NTP Service check box.
3 Click Save.
4 STOP. This procedure is complete.
Release 05.08.01 | June 2018 | Edition 01