Copyright © 2007 Nokia. All rights reserved.
Connections
60
For Bluetooth connectivity indicators, see ’Essential
indicators’, p. 17.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select Options > Send > Via
Bluetooth.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2 Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons: computer, phone, audio or
video device, and other device.
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ’Pair devices’, p. 60.
5 When the connection has been established, Sending
data is shown.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Pair devices
To pair with compatible devices and view your paired
devices, in the Bluetooth application main view, press .
Before pairing, create your own passcode (1–16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
1 To pair with a device, select Options > New paired
device. Devices with Bluetooth wireless technology
within range start to appear on the display.
2 Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
Some audio enhancements connect automatically to your
device after pairing. Otherwise, scroll to the enhancement,
and select Options > Connect to audio device.
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorised—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
