Copyright © 2007 Nokia. All rights reserved.
Make calls
86
screen with a still image captured by the camera in your
device, see ’Call’, Image in video call, p. 104.
To end the video call, press .
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Phone > Call > Call waiting (network service).
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press . To end both
calls, select Options > End all calls.
Log
To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select Tools >
Log > Recent calls. The device registers missed and
received calls only if the network supports these
functions, the device is switched on, and within the
network service area.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call duration
To monitor the approximate duration of your incoming and
outgoing calls, press , and select Tools > Log > Call
duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code. See ’Phone and
SIM card’, p. 101.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select Tools >
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
