To end the active connection, select the connection and
Disconnect WLAN.
WLAN internet access points
Select Menu > Settings and Connectivity > Wireless
LAN > Options.
Select from the following:
Filter WLAN networks — Filter out wireless LANs
(WLANs) from the list of found networks. The selected
networks are not displayed the next time the application
searches for WLANs.
Details — View the details of a network shown in the list.
If you select an active connection, the connection details
are displayed.
Operating modes
There are two operating modes in WLAN: infrastructure
and ad hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a WLAN access point device, or wireless
devices are connected to a wired LAN through a WLAN
access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.
Wireless LAN settings
Select Menu > Settings and Connectivity > Wireless
LAN > Options > Settings.
Select from the following:
Show WLAN availability — Select whether
is
displayed when a wireless LAN (WLAN) is available.
Tip: To access the WLAN Wizard application and view the
available options, select the WLAN icon, and in the pop-up
window, select the highlighted text next to the WLAN icon.
Scan for networks — If you set Show WLAN
availability to Yes, you can select how often the device
searches for available WLANs and updates the indicator.
Internet connectivity test — Select whether you want
the device to test the internet capability of the selected
WLAN automatically, to ask for permission every time, or
to never perform the connectivity test. If you select Run
automatically or allow the test to be performed when the
device asks for it, and the connectivity test is performed
successfully, the access point is saved to the internet
destinations.
To view advanced settings, select Options > Advanced
settings. Changing the advanced settings for the WLAN is
not recommended.
Access points
Create a new access point
Select Menu > Settings and Connectivity >
Destinations.
You may receive access point settings in a message from
a service provider. Some or all access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
64
Connectivity
To Next Page
Loading...
Need help?
General
