ID50 Series Panel - Operating Manual
Operator Actions at Panel
36997-264-000-8, Issue 8
January 2007
4.11.2 Date - User Option
The Date User Option allows the user to enter or edit the
current date displayed on the LCD. To enter or edit the
date, proceed as follows:
1 Using the numeric keypad, press the ‘
2
’ button to
select the Date option.
2 The LCD prompts for entry of a new date. Using the
numeric keypad, enter the numbers directly. All digits
are automatically entered into position from left to right
on the display.
After entering the last digit press the ‘
5
’ to confirm
and return to the Clock menu.
Note: The date MUST be entered in the same format as
indicated on the LCD. Only date entries between
2000 and 2063 are valid.
If an invalid date is entered, for example
222222 - 22/22/22, the LCD displays an error
message and then re-displays the Clock menu.
[U0 Clock] 1 : Time 2 : Date
ENTER NEW DATE (format dd/mm/yy)
- -/- -/- - <:Cancel
Invalid Value Entered !
ENTER NEW DATE (format dd/mm/yy)
12/12/00 <:Cancel
[U0 Clock] 1 : Time 2 : Date
ENTER NEW DATE (format dd/mm/yy)
22/22/22 <:Cancel
[U0 Clock] 1 : Time 2 : Date
1 1
5
2
2 2 0 0
5
2 22
2
2
2
To Next Page
Loading...
Need help?
General
