Notifier ID50 SERIES User Manual

ID50 Series Panel - Operating Manual
Operator Actions at Panel
42997-264-000-8, Issue 8
January 2007
4.12.5 Disabled - User Option
The Disablement User Option allows the user to view all
current loop-based input disablements recorded on the
system. To view each disablement in turn, from the VIEW
Mode menu:
1 Using the numeric keypad, press the ‘
5
’ button to
select the Disablements display.
2 The LCD automatically displays either:
a. The zone disablements, or
b. The NO disablements message, if no current
Disablements are present on the system.
3 If more than one disablement is present, press the
‘
2
/
8
’ buttons to scroll through the Disablement
entries (see examples below):
a. Condition,
b. Disablement currently
displayed,
c. Active disablements,
d. Zone number,
e. Device address,
f. Device type,
g. Zonal and device text
(if any).
4 Press the ‘
4
’ button to return to the View Mode
menu.
4.12.6 Alarm Count - User Option
The Alarm Count User Option allows the user to view the
number of times the panel has entered alarm condition
since manufacture. To view the Alarm Count, from the
VIEW Mode menu:
1 Using the numeric keypad, press the ‘
6
’ button to
select the Alarm Count display.
* ID60 panels only
2 The LCD displays the Alarm Count. Press the ‘
4
’
button to return to the View Mode menu.
[U0 View] 1:Log 2:Devices 3:Faults
4:Input Events 5:Disabled ↕ : More
DISABLEMENT 01 / 01 Z01 S02 TMP
< - - - Zone Text - - - > < - - - Device Text - - - >
There are no loop devices disabled
<:Exit
ABCDEFG
DISABLEMENT 01 / 09 Z01 S02 TMP
< - - - Zone Text - - - > < - - - Device Text - - - >
DISABLEMENT 01 / 09 Z01 S03 TMP
< - - - Zone Text - - - > < - - - Device Text - - - >
Current Alarm Count is 12
<:Exit
5
2
8
6
[U0 View] 6: Maint.* 7: Alarm Count
8: Voltages 9: Version ↕ : More

Notifier ID50 SERIES Specifications

General

Brand	Notifier
Model	ID50 SERIES
Category	Fire Alarms
Language	English