To Next Page

To Previous Page

SADDLE STITCH FINISHER

3-17

■ Saddle stitch function

The saddle stitch finisher can automatically place two

staples for centerline binding of prints or copies and fold

them along the centerline.

■ Hole punching

Printed paper can be hole punched and delivered to the

offset tray. Saddle stitching and hole punching cannot be

selected at the same time. The automatic image rotation

will not function when the hole punching function is used.

Two or three holes can be punched depending on the

paper size. (See paper sizes for hole punching on page

4-4.)

If the punching function is enabled for a paper size that

cannot be punched, the paper will be output without being

punched. (For paper sizes that can be punched, see the

specifications on page 3-15.) When using the punching

function in copy mode, place the original with the top edge

toward the back of the machine. If the original is not placed

in this orientation, punching will not take place at the

correct positions.

{Original 2}

{Punch positions}

{Original 1}

{Punch positions}

Copy_SEC.book 17 ページ２００７年９月１２日　水曜日　午後１時３３分

Oce im3512 User Manual

Other manuals for Oce im3512