Oki B4545 MFP User Manual

Operation
102
OTHER FUNCTIONS
LOGS
The incoming and outgoing logs list the last 30 transmissions (incoming and
outgoing) made by your terminal.
An automatic print out will take place after every 30 transmissions. However,
you may request a print out at any time.
Each log (incoming or outgoing) contains a table with the following
information:
• date and time of the incoming or outgoing document
• subscriber’s number or E-mail address
• transmission mode (Norm, Fine, SFine or Photo)
• number of pages sent or received
• call duration
• incoming or outgoing results: noted
CORRECT if properly transmitted
or
information codes for special calls (polling, manual subscribers, etc.)
• reason for call error (example: your subscriber does not answer)
To print the logs:
52 OK - PRINT / LOGS
The incoming and outgoing logs are printed on the same page.
PRINTING THE FUNCTIONS LIST
You may print the functions list of your fax machine at any time.
To print the functions list:
51 OK - PRINT / FUNCTIONS LIST
PRINTING THE TERMINAL SETTINGS
At any moment, you may print the list of your terminal’s parameter settings
to control any changes possibly made to the default parameters.
Printing the terminal settings:
54 OK - PRINT / SETUP
Your terminal prints the list of stored parameters.

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W