Oki B4545 MFP User Manual

Maintenance
142
Code 50 - Server error
Check the number of the parametred SMS or an error occured when data
were configured.
Printer errors
Error messages
If the printer has one of the problems described below, the signal "On"
flashes red, and you can’t use your terminal temporarily. The
corresponding message is displayed on the screen.
Message Action
CHANGE TONER
<OK> TO CONFIRM
Replace the toner cartridge.
Proceed as indicated Replacing the toner
cartridge, page -125.
CHANGE DRUM
<OK> TO CONFIRM
Replace the drum cartridge.
Proceed as indicated Replacing the drum
cartridge, page -131.
CANNOT READ CARD
CHANGE WAY UP
Insert your chip card in the other way up.
CLOSE FRONT
COVER
Close the front cover of the printer.
CLOSE PRINTER
UPPER COVER
Close the printer rear upper cover.
TONER NEAR END
The toner cartridge is nearly worn out (10%
capacity left).
PAPER EMPTY
Install the paper tray.
Fill the tray with paper in the required size.
PAPER JAM INSIDE
Open the tray.
Remove the jammed sheet.

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W