58
Setting your terminal
Changing the connection period (PERIODIC type)
943 OK - INTERNET / SETTINGS / PERIOD
+ With the PERIODIC mode, enter the new connection period by
means of the numerical keypad (between 00:01 am and
11:59 pm) and press OK to confirm.
An Internet connection will be established every three hours (default
value).
Modifying the connection time(s) (SET TIMES type)
943 OK - INTERNET / SETTINGS / TIME SETTINGS
+ After selecting the SET TIMES mode, use the and keys to
place the cursor under the figure to be modified. Enter the new
connection time(s) by means of the numeric keypad (value
between 00:01 and 23:59) and validate with the OK key.
Selecting the print mode for the deposit notice
944 OK - INTERNET / SETTINGS / DEPOSIT NOTI
+ Select one of the deposit notice options WITH, WITHOUT,
ALWAYS
or ON ERROR and press OK to confirm.
Printing the Internet settings
945 OK - INTERNET / SETTINGS / PRINT
The Internet settings are printed.
These settings may also be printed together with all the other
settings of your terminal (refer to paragraph Printing the terminal
settings, page 102).
Access to the authentification SMTP parameters
924 OK - INTERNET / INIT. PROVIDER /
SMTPAUTHENT.
In the ACTIVATION menu, select WITH to activate SMTP
authentification then validate with OK key.
In the PARAMETERS menu, select ID.MESS.SERV to keep the
same identification parameters as in the messaging service or
AUTHENT. SPEC. to define other identification parameters, then
validate with Access to SMTP authentification parameters by
pressing OK key. When you select AUTHENT. SPEC, carry out the
two following operations
+ Enter the IDENTIFIER then validate with OK key.
+ Enter the PASSWORD then validate with OK key.
To Next Page
Loading...
Need help?
Printer
