Oki B4545 MFP User Manual

Setting your terminal
40
Your fax number/your name
Remark : In the United States, as required by FCC regulations, a heading
must be included on all FAX messages.
Your fax will print out your fax number on each document it transmits if you
save this number and if the terminal is set to Sending header (refer to
paragraph Technical parameters, page 47).
To save your fax number and your name:
22 OK - SETUP / NUMBER / NAME
+ Enter your fax number (20 digits max.) and press OK to confirm.
+ Enter your name (20 characters max) then press OK to confirm.
Type of network
You may connect your fax to either a PSTN or private network such as private
automatic branch exchange (PABX). Select the network that applies.
To select the type of network:
2511 OK - SETUP / NETWORKS / TEL. NETWORK / NETWORK
TYPE
+ Select option Pabx or Pstn then confirm your choice with OK.
Geographical settings
These settings will enable you to use your terminal in different preset
countries using different languages.
Country
By choosing a country, you initialize:
• the settings for the public telephone network,
• the language by default.
To select the country:
201 OK - SETUP / GEOGRAPHICAL / COUNTRY
+ Select the required option and press the OK key to confirm.
Network
This setting enables you to individually set the type of public
telephone network so that your terminal can communicate over the
public network of the country you have chosen in compliance with
the applicable standards.
Remark : these settings are different from the Network Type (p. 31, which allows you to
choose between public and private network.

Oki B4545 MFP Specifications

Printer

print speed	21 ppm
time to first page	13 seconds
print resolution	600 x 600 dpi
processor speed	92 MHz
duty cycle	12, 500 prints/copies per month

Fax

fax modem speed	33.6 Kbps
transmission speed	2.5 seconds
fax memory	500 pages (8 MB)

System Memory

standard imaging RAM	64 MB

Scanner

scan type	Color and Black & White
scan speed	1.8 sec./pg. Black & White; 16 sec./pg. Color
scan resolution	600 x 2400 dpi

Environmental

dimensions	17.9" x 17.5" x 20.5"
weight	32.0 lb. (14.5 kg)
power consumption	Operating 580W, Idle 20W, Power Save 15W