98 • Printer Settings in Windows
PCL emulation
Setup tab
1. Paper size should be the same as the page size of your document (unless you
wish to scale the printout to fit another size), and should also be the same as the
size of paper you will feed into the printer.
2. You can choose the source of the paper to feed, which may be Tray 1 (the
standard paper tray), Manual (MB460 MFP), Multi Purpose Tray (MB470 MFP,
MB480 MFP), or Tray 2 (if you have the optional second paper tray installed). You
can also click on the appropriate part of the screen graphic to select your
preferred tray.
3. A variety of document finishing options can be selected, such as normal one page
per sheet, or N-up (where N can be 2 or 4) for printing scaled down pages at
more than one page per sheet.
4. Under 2-sided Printing, you can choose from auto or manual. Under manual 2-
sided Printing you can choose to print on one side of a sheet only or to use 2-
sided printing (duplex printing). Your printer allows you to carry out manual
duplex printing, meaning you must pass the paper through the printer twice. For
more information, see “2-sided (duplex) printing” on page 111. The Duplex Help
button also offers guidelines on how to carry out manual duplex printing.
5. If you have changed some printing preferences before and saved them as a set,
you can recall them to avoid having to set them individually each time you need
them.
6. A single on-screen button restores the default settings.
1
2
3
4
5
6
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
