Oki MC350 User Manual

Configuring your machine... > 29
C ONFIGURING YOUR MACHINE ...
M INIMUM CONFIGURATION REQUIREMENTS
To make the best of this MFP, the following configuration is required:
To send faxes (MC360):
A PSTN telephone line connection.
To send e-mails:
> TCP/IP network.
> A SMTP and an optional POP3 server.
> Default “From” Address (this MFP’s Address).
To file document(s) via intranet
> FTP or CIFS Protocol environment.
> Windows 2000, Windows XP, Windows Vista, or FTP server.
P RE - CONFIGURATION INFORMATION
G ENERAL
Ensure that you have the relevant permission/PIN numbers before commencing.
The Factory set default passwords/PIN are:
Administrator aaaaaa
PIN 000000
Network (web page) last 6 figures of MAC address
F AX SET UP (MC360)
Your MFP has to be set up properly to allow faxing from the machine. The following
parameters must be set before using the fax function:
> Date and time
> Country code
> Local phone number
> Sender ID
See “Initial set up” on page 44 for details.
NOTE
The administrator password should be changed and maintained by the system
administrator.
NOTE
If you ran the Oki driver installer program from the DVD-ROM you may have
already set the time zone, date and time via the Panel Language Setup utility.
Downloaded From ManualsPrinter.com Manuals

Oki MC350 Specifications

General

Brand	Oki
Model	MC350
Category	All in One Printer
Language	English