Oki ML6300FB-SC User Manual

Paper handling > 21
8. Press the FF/LOAD button. The continuous forms will be taken into the printer and
positioned at the first line print position and the SEL indicator will illuminate.
T EARING OFF CONTINUOUS FORMS
1. With the SEL indicator illuminated, press the TEAR button to eject the continuous
forms onto the Paper Tray.
2. Carefully tear off the forms along the tear-off perforations in the direction shown.
Using excessive force may result in tearing at a position other than the tear-off
perforations.
3. Press the TEAR button, FF/LOAD button or LF button to reposition the continuous
forms in the printer back to the first line print position.
A LIGNING THE TEAR - OFF PERFORATIONS
If the tear-off perforations are not aligned with the paper cutter on the Top Cover, align
them as follows:
1. With the SEL indicator illuminated, press and hold the TEAR button to move the
tear-off perforations to the paper cutter on the Top Cover.
2. Check the position of the tear-off perforations (1) relative to the paper cutter (2).
(Paper Tray (3) is shown for clarity.)
(a) To advance the forms, hold down the TEAR button and press the FF/LOAD
button.
(b) To retract the forms, hold down the TEAR button and press the LF button.
3. Release the buttons after the tear-off perforations have been aligned with the paper
cutter.
NOTE
If a movement greater than +- 7/90 in is specified, the QUIET indicator blinks
and the above adjustment cannot be made.
1
2
3

Oki ML6300FB-SC Specifications

General

Color	No
Character pitch	10, 12, 15, 17, 17.1, 20 cpi
Maximum resolution	360 x 360 DPI
Maximum printing width (columns)	-
Fonts included	Courier, Roman, Swiss, Prestige, Gothic, Utility, Swiss Bold, Orator, OCR-A, OCR-B, HSD & Barcodes
Print technology	Dot matrix
Connectivity technology	Wired
Page description languages	Epson ESC/P2, IBM ProPrinter
Sound pressure level (printing)	58 dB
Print direction	Bi-directional
Mean time between failures (MTBF)	12000 h
Paper feed	Manual
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Ethernet, Serial (RS-232)
Windows operating systems supported	Yes
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	30 - 85 %
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	255 mm
Width	425 mm
Height	210 mm