Operating instructions > 34
Q
UICK
PRINTER
SETTINGS
P
RINTER
IMPACT
MODE
When switched ON, the printer enters the impact mode selected in the menu. You can
change this to normal speed and quiet printing without using the menus as follows.
Normal speed printing
Use this for standard file printing operations.
1. Ensure the SEL indicator is illuminated.
2. Hold down the SHIFT button and press the TEAR button.
The QUIET indicator turns off.
Quiet printing
Use this for quieter printing.
1. Ensure the SEL indicator is illuminated.
2. Hold down the SHIFT button and press the TEAR button.
The QUIET indicator is illuminated.
Emphasis printing
Use this for printing multipart forms.
You have to set emphasis printing by using the menus to set Impact Mode to Hi Copy as
described in “Menu setting” on page 26.
CAUTION!
Do not use emphasis printing if performing horizontal tab character
printing on thin paper as the paper may become damaged.
NOTE
> If the paper on top is so thick that duplication on the paper below it fails,
use emphasis printing.
> In emphasis printing mode, printing is carried out twice.
> The print may become blurred if high density characters and graphics are
printed using a new ribbon.
> In emphasis mode, ensure that the paper is flat to avoid possible printing
errors.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
