Oki ML6300FB-SC User Manual

Consumables and accessories > 44
C ONSUMABLES AND ACCESSORIES
C ONSUMABLES
When the printed image becomes faint or incomplete, replace the ribbon cartridge.
C HANGING A RIBBON CARTRIDGE
1. Set the Power Switch to OFF.
2. Set the Paper Thickness lever to Replace Ribbon (position 10) and open the Top
Cover.
3. Move the carriage (1) to the cutout (2) for ribbon replacement position.
CAUTION!
Only use genuine Original consumables to ensure the best quality
and performance from your hardware. Non Original products may
damage your printer’s performance and invalidate your warranty.
WARNING!
Do not change the ribbon cartridge with the Power Switch set to
ON.
WARNING!
The print head and area around it may be hot after printing. Allow
it to cool down before touching it.
1
2

Oki ML6300FB-SC Specifications

General

Color	No
Character pitch	10, 12, 15, 17, 17.1, 20 cpi
Maximum resolution	360 x 360 DPI
Maximum printing width (columns)	-
Fonts included	Courier, Roman, Swiss, Prestige, Gothic, Utility, Swiss Bold, Orator, OCR-A, OCR-B, HSD & Barcodes
Print technology	Dot matrix
Connectivity technology	Wired
Page description languages	Epson ESC/P2, IBM ProPrinter
Sound pressure level (printing)	58 dB
Print direction	Bi-directional
Mean time between failures (MTBF)	12000 h
Paper feed	Manual
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Ethernet, Serial (RS-232)
Windows operating systems supported	Yes
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	30 - 85 %
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	255 mm
Width	425 mm
Height	210 mm