Oki ML6300FB-SC User Manual

Troubleshooting > 35
T ROUBLESHOOTING
C LEARING PAPER JAMS
C UT SHEET PAPER JAMMED IN PRINTER
1. Set the Power Switch to OFF.
2. Open the Top Cover.
3. Set the Paper Thickness lever to the Replace Ribbon position (position 10).
4. Move the Print Head away from the paper.
5. Rotate the Platen Knob in the relevant direction and pull the cut sheet out from the
front or rear of the printer.
WARNING!
Do not carry out any operations inside the printer with the Power
Switch set to ON.
WARNING!
The Print Head may be hot after printing. Allow it to cool before
touching it.

Oki ML6300FB-SC Specifications

General

Color	No
Character pitch	10, 12, 15, 17, 17.1, 20 cpi
Maximum resolution	360 x 360 DPI
Maximum printing width (columns)	-
Fonts included	Courier, Roman, Swiss, Prestige, Gothic, Utility, Swiss Bold, Orator, OCR-A, OCR-B, HSD & Barcodes
Print technology	Dot matrix
Connectivity technology	Wired
Page description languages	Epson ESC/P2, IBM ProPrinter
Sound pressure level (printing)	58 dB
Print direction	Bi-directional
Mean time between failures (MTBF)	12000 h
Paper feed	Manual
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Ethernet, Serial (RS-232)
Windows operating systems supported	Yes
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	30 - 85 %
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	255 mm
Width	425 mm
Height	210 mm