Menu functions (Shooting menu)
4
103
EN
Processing options (Picture Mode)
You can make individual adjustments to contrast, sharpness and other parameters in
[Picture Mode] (P. 72) settings. Changes to parameters are stored for each picture
mode separately.
1
Select [Picture Mode] in W Shooting Menu 1 and
press the Q button.
• The camera will display the picture mode available in the
current shooting mode.
2
1
p
Picture Mode
Digital Tele-converter
Metering
Reset
Off
2
Select an option with FG and press the Q button.
• Press I to set the detailed options for the selected picture mode. Detailed options are not
available for some picture modes.
• Changes to contrast have no eect at settings other than [Normal].
Digital Zoom (Digital Tele-converter)
This option takes a crop at the center of the frame the same dimensions as the size
option currently selected for image quality and zooms it in to ll the display. The zoom
ratio increases by about 2×. This allows you to zoom in past the lens’ maximum focal
length, making it a good choice when you are unable to switch lenses or nd it dicult
to get any closer to your subject.
1
Select [On] for [Digital Tele-converter] in W Shooting Menu 1.
2
The view in the monitor will be enlarged by a factor of two.
• The subject will be recorded as it appears in the monitor.
• Digital zoom is not available when multiple exposure, panorama, or keystone
compensation is selected in Z mode or when [Standard] is selected in movie mode.
• When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
• AF target drops.
• H is displayed on the monitor.
Improving Focus in Dark Surroundings (AF Illuminator)
The AF illuminator (AF assist lamp) lights to assist the focus operation in dark
environments. Select [O] to disable AF illuminator.
To Next Page
Loading...
Need help?
General
