Shooting
2
69
EN
The Electronic Shutter (Silents)
Take pictures using the electronic shutter. Use for shutter speeds faster than 1/4000 s
or in settings where the sound of the shutter would be unwelcome. The electronic
shutter can be used in single-frame mode and self-timer modes and for frame rates
as high as about 14 fps in sequential shooting modes. This setting is only available in
P/A/S/M/ART modes.
• When the ash res, the shutter speed is set to 1/20 seconds or slower.
• By default, [8]/[AF Illuminator]/[Flash Mode] is disabled in the [Silents] mode. Each
item can be enabled in [SilentsSettings].
1
Press the jY (G) button.
2
Highlight one of the options marked with ♥ using HI.
3
Press the Q button.
• When the shutter is released, the monitor screen will go dark for a moment. No
shutter sound will be emitted.
• The desired results may not be achieved under ickering light sources such as uorescent
or LED lamps or if the subject moves abruptly during shooting.
• Note that due to the electronic shutter, the subject may appear to be distorted in
photographs if camera moves quickly during shooting or when shooting fast-moving
subjects.