Shooting
2
52
EN
Using [Partial Color]
Record only selected hues in color.
1
Press the Q button and use FG to highlight the picture mode.
2
Highlight [Partial Color 1/2/3] using HI.
3
Press the INFO button.
• A color ring appears in the display.
ColorColor
P
Color ring
4
Select a color using HI or the control dial.
• The effect is visible in the display.
5
Shoot.
Changing ISO sensitivity (ISO)
Increasing ISO sensitivity increases noise (graininess) but allows photographs to be
taken when lighting is poor.
1
Press the Q button and then highlight ISO
sensitivity using FG.
2
Highlight an option using HI and press the Q
button.
AUTOAUTOAUTOAUTO
AUTOAUTO
L
N
4:3
AFAF
FHD
30p30p
F
WB
AUTO
WB
AUTO
P
250 0.0F5.6
Recommend
100100 125125 160160 200200 250250 320320
ISO
AUTO
ISO
AUTO
ISO
AUTO
The sensitivity is set automatically according to the shooting conditions. The
maximum ISO sensitivity value and other auto ISO settings can be adjusted
using the [ISO-Auto Set] option in custom menus (P. 97).
100–12800
The sensitivity is set to the selected value.
To Next Page
Loading...
Need help?
General
