30
CJ2M CPU Unit Pulse I/O Module User’s Manual
Unit Versions of CJ2 CPU Units
When using a Pulse I/O Module, use the following unit version of a CJ2M CPU Unit and the following
version of the CX-Programmer.
Refer to the CJ2 CPU Unit Hardware Manual (Cat. No. W472) or the CJ2 CPU Unit Software Manual
(Cat. No. W473) for information on unit versions.
Unit Versions and Programming Devices
CJ2M CPU Unit Unit version 2.0 (Built-in Ether-
Net/IP section: Unit version 2.0)
CX-Programmer Ver. 9.12