Omron CP1E-ED User Manual

5 Installation and Wiring
5-8
CP1E CPU Unit Hardware User’s Manual(W479)
 DIN Track Installation
Secure the DIN Track with screws in at least three places.
 Surface Installation
A CP1E CPU Unit and CP-series Expansion I/O Units and Expansion Units can be mounted using
M4 screws. For restrictions on the number of Expansion I/O Units and Expansion Units that can be
connected, refer to 2-3 Expansion I/O Unit or Expansion Unit.
1 Use a screwdriver to pull down the DIN Track mounting pins from the back of the Units to
release them, and mount the Units to the DIN Track.
2 Fit the back of the Units onto the DIN Track by catching () the top of the Units on the Track and
then pressing () in at the bottom of the Units, as shown below.
Installation Example
DIN Track Installation
DIN Track
Secure with screws
Release
DIN Track mounting pins
DIN Track




Omron CP1E-ED Specifications

General

Brand	Omron
Model	CP1E-ED
Category	Controller
Language	English