4 Programming Device
4-2
CP1E CPU Unit Hardware User’s Manual(W479)
4-1 Applicable Programming Devices for
CP1E
A programming device is a software application for initializing, programming, monitoring, and debug-
ging PLCs. This section describes the programming device used by CP1E.
The programming devices in the following table are used to program and monitor the CP1E Unit.
Note 1
To use CX-Programmer version 8.2 with a CP1E CPU Unit, the CX-One version 3 auto-update must be
installed.
2 Use the CX-
Programmer version 9.12 or higher, when CP1W-CIF41 is applied.
•
The CX-Programmer for CP1E and CX-Programmer (CX-One/CX-One Lite) can be used at the same time.
• The CX-Programmer (CX-One/CX-One Lite) and the CX-Programmer for CP1E can be installed on
the same computer and both applications can be run at the same time.
Precautions for Correct UsePrecautions for Correct Use
• This section describes the unique applications and functions of the Micro PLC Edition CX-
Programmer version 9.03 or higher/CX-Programmer for CP1E. In the remainder of this sec-
tion, “CX-Programmer” refers to the Micro PLC Edition CX-Programmer version 9.03 or
higher/CX-Programmer for CP1E.
When using the full version of CX-Programmer provided in CX-One, refer to the CX-Program-
mer Operation Manual (Cat. No. W446).
• A Programming Console cannot be used for the CP1E. Use the CX-Programmer.
4-1-1 Applicable Programming Devices
Product Model
Compatible CX-
Programmer
versions
Unit version of
CP1E CPU Unit
Support for
Smart Input
Saved pro-
gram file
extension
Reference
Applicable
CPU Unit
CX-Programmer
(CX-One)
WS02-
CXPC1-V8
Version 8.2 or
higher (See note.)
Version 1. Not
supported
.CXP Refer to the
CX-Program-
mer Operation
Manual (Cat.
No. W446).
CP1E-20D-
CP1E-30D-
CP1E-40D-
WS02-
CXPC1-V9
Version 9.03 or
higher
Version 1. Supported
All units are sup-
ported
Micro PLC Edition
CX-Programmer
(CX-One Lite)
WS02-
CXPC2-V8
Version 8.2 or
higher
Version 1. Not
supported
.CXP Described in
this section.
CP1E-20D-
CP1E-30D-
CP1E-40D-
WS02-
CXPC2-V9
Version 9.03 or
higher
Version 1. Supported
All units are sup-
ported
CX-Programmer
for CP1E
WS02-
CXPC3
Version 1.0 Version 1. Supported .CXE CP1E-20D-
CP1E-30D-
CP1E-40D-
CP1E CPU Unit
USB
CX-Programmer
IBM PC/AT or
equivalent
To Next Page
Loading...
Need help?
General
