Omron CP1E-ED User Manual

4-3
4 Programming Device
CP1E CPU Unit Hardware User’s Manual(W479)
4-1 Applicable Programming Devices for CP1E
4
4-1-2 CX-Programmer
 Using Project Files Saved with the CX-Programmer (.CXP) on the CX-
Programmer for CP1E
The CX-Programmer for CP1E cannot open a .CXP project created on the CX-Programmer (CX-
One/CX-One Lite). Use programming from a project saved in a .CXP file on the CX-Programmer for
CP1E according to the following procedure.
1 Start the CX-Programmer (CX-One/CX-One Lite) and CX-Programmer for CP1E together.
2 Copy the rungs of the program to be used from the Ladder Programming Window of the CX-Pro-
grammer (CX-One/CX-One Lite), and paste them into the CX-Programmer for CP1E.
Additional Information
Files created with the CX-Programmer for CP1E (.CXE) can be opened with CX-Programmer
version 8.2 and higher.
The CX-Programmer is a basic software application for creating and debugging PLC programs.
4-1-2 CX-Programmer
CX-Programmer
CX-Programmer
Programming Tasks Ladder diagrams
Programming functions
Monitoring
Debugging and maintenance functions
PLC Setup
CPU Unit parameters

Omron CP1E-ED Specifications

General

Brand	Omron
Model	CP1E-ED
Category	Controller
Language	English