Omron CPM2A - 11-2005 User Manual

4-1SectionCompatible Programming Consoles
95
If the Programming Console is connected to the PC when PC power is already
on, the first display below will indicate the mode the PC was in before the Pro-
gramming Console was connected. Ensure that the PC is in PROGRAM mode
before you enter the password. When the password is entered, the PC will
shift to the mode set on the mode switch, causing PC operation to begin if the
mode is set to RUN or MONITOR. The mode can be changed to RUN or MON-
ITOR with the mode switch after entering the password.
Indicates the mode set by the mode selector switch.
<PROGRAM>
PASSWORD!
<PROGRAM> BZ

Omron CPM2A - 11-2005 Specifications

General

Brand	Omron
Model	CPM2A - 11-2005
Category	Controller
Language	English