I-1
Index
A
accessories
BCD communications
, 11-6
addresses (CompoWay/F communications)
, 1-8
advanced function setting level
, 2-10
B
Bank Selection, 1-18
baud rate
automatic detection
, 3-3
BCD communications
, 11-1
accessories
, 11-6
cables
, 11-6
connection example, 11-2
connectors
, 11-6
data overflow, 11-6
data underflow, 11-6
DM Area
, 11-8, 11-11
I/O allocations, 11-7, 11-10
I/O ratings, 11-3
ladder programming
, 11-9, 11-13
operation, 11-7, 11-8, 11-11
overview, 11-2
precautions
, 11-5
programming example for PLC connection, 11-7, 11-10
specifications, 11-3
timing charts
, 11-5, 11-8, 11-12
bit strobe
, 10-2
C
cables
BCD communications
, 11-6
communications cables
models
, 10-7
change of state (COS)
, 10-2
cleaning
, 9-3
command block
, 7-3, 7-5, 7-6
commands
Bank Selection
, 1-18
CompoWay/F ASCII commands
, 7-3, 7-5
CompoWay/F binary commands, 7-3, 7-5
CompoWay/F communications, 1-13
Controller Status Read (CompoWay/F communications)
,
1-21
Echo Back Test
, 1-22
Initialize Settings, 1-20
Monitor Value Read (CompoWay/F communications)
,
1-13
Monitor Value/Setting Data Compound Read (Compo-
Way/F communications)
, 1-14
Monitor Value/Setting Data Compound Read Store
(Write)
, 1-16
Monitor Value/Setting Data Compound Store Read
, 1-17
Move to Protect Level, 1-20
Move to Setting Area 1, 1-20
Read Machine Attributes
, 1-21
Reset, 1-18
Setting Data Compound Write (CompoWay/F communi-
cations)
, 1-16
Setting Data Read (CompoWay/F Communications),
1-13
Setting Data Write (CompoWay/F communications),
1-15
Software Reset, 1-19
Write Via Communication
, 1-18
Zero Execute/Cancel, 1-19
communications
connection example
, 3-2
connection example for BCD communications
, 11-2
cycle time, 8-3
distance, 3-5
performance
, 8-1
specifications, 3-5
communications cables
, 10-7
DeviceNet, 10-7
preparing
, 5-4
wiring, 5-4
communications monitoring settings
, 2-3
Communications Power Voltage Monitor Error Flag
, 4-4,
6-5
communications setting level
, 2-10
communications specifications
, 1-2
comparative set value level
, 2-7
CompoWay/F
commands
, 7-4
communications method, 1-2
CompoWay/F ASCII commands
, 7-3, 7-5
CompoWay/F binary commands
, 7-3, 7-5
CompoWay/F commands
, 7-2
Configurator
operations, 4-2
connection types
, 10-2
connections
hardware
, 10-7
connectors
attaching
, 5-6