Omron K3HB-PPB User Manual

6-8
Ladder Programming Examples Section 4-3
Remote I/O Com-
munications
Note When using this type of ladder programming, do not use the timer method
used in this example. Instead, allocate the status and confirm that the value
has changed and then disable the strobe, specifically:
a. Allocate status in the IN Area using the Configurator.
b. Execute operation commands and use the status to confirm that the
status has been cleared to zero and then disable the strobe.

Omron K3HB-PPB Specifications

General

Weight	Approx. 200 g
Mounting	Panel Mount
Input Type	Voltage, Current
Power Supply	100 to 240 VAC, 50/60 Hz
Output	Relay, Analog
Operating Temperature	0 to 50 °C
Protection	IP66
Display	7-segment LED