To Next Page

To Previous Page

Introduction

Thank you for purchasing an NX-series CPU Unit.

This manual contains information that is necessary to use the NX-series CPU Unit. Please read this

manual and make sure you understand the functionality and performance of the NX-series CPU Unit

before you attempt to use it in a control system.

Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-

tems (an electrical engineer or the equivalent).

• Personnel in charge of introducing FA systems.

• Personnel in charge of designing FA systems.

• Personnel in charge of installing and maintaining FA systems.

• Personnel in charge of managing FA systems and facilities.

For programming, this manual is intended for personnel who understand the programming language

specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.

Applicable Products

This manual covers the following products.

• NX-series CPU Units

NX1P2-££££££

NX1P2-££££££1

• Serial Communications Option Board

NX1W-CIF££

• Analog I/O Option Board

NX1W-ADB21

NX1W-DAB21V

NX1W-MAB221

Part of the specifications and restrictions for the CPU Units are given in other manuals. Refer to Rele-

vant Manuals on page 2 and Related Manuals on page 41.

Introduction

NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)

Omron NX1P2 series Hardware User Manual

Other manuals for Omron NX1P2 series