Omron SYSMAC CJ1W-EIP21 User Manual

194
Message Communications Error Indications Section 7-5
7-5 Message Communications Error Indications
There are two ways to obtain information on communications errors that occur
in message communications: checking the EtherNet/IP Unit’s error log or
checking its indicators.
1,2,3... 1. Each time a communications error occurs, an error code is placed in an er-
ror record in the error log stored in RAM in the EtherNet/IP Unit or CPU
Unit with the built-in EtherNet/IP Port. Up to 64 records can be stored in
the error log. The time and date that the error occurred are also recorded
together.
The error log can be read or cleared from the CPU Unit by sending an FINS
command to the EtherNet/IP Unit (Error Log Read/Clear). The contents of
the error log can also be monitored from the Configurator.
2. When a communications error has occurred, details on the error are indi-
cated by the MS and NS indicators and the 7-segment display on the front
panel of the EtherNet/IP Unit or CPU Unit with the built-in EtherNet/IP port.
This information can be used for troubleshooting.
CPU Unit
Configurator
FINS command
Read-out
Monitor
Code
Code
Code
64 records
Example: Routing table erro
r
Flashing red
Not relevant
NS
MS
Communications status 3
15 00
EtherNet/IP
Unit
CPU
Unit

Omron SYSMAC CJ1W-EIP21 Specifications

General

Brand	Omron
Model	SYSMAC CJ1W-EIP21
Category	Network Hardware
Language	English