WWW.NNC.IR
Saving Data to the FH/FZ5
256
Vision System FH/FZ5 Series
User’s Manual (Z340)
Drive Name of SD Memory Card
The FH has a slot for an SD memory card. This is a fixed drive and is assigned as drive M:\.
Using External Memory Devices (FH and FZ5-11 Only)
Use the following procedure to remove the external memory device.
1 In the Main Window, select [System information] from the [Function] menu.
The system information is displayed.
2 Information on each drive is displayed in
the [Memory state] dialog box.
If an external memory device is inserted, the
[Eject] button is displayed.
3 To remove the USB memory device, click the [Eject] button.
When the USB Memory Can Be Removed
If the removal failed, wait until the external
memory device is no longer being accessed
and then try removing the device again.
Shared folder on a computer connected to the network
You can setup a network drive in the system settings. This allows the Sensor Controller to handle the hard drive
on a computer that is connected to the local area network as an external memory device.
Reference: Setting a Network Drive: [Network Drive Setting] (p.298)
Box-type Controllers
If USB memory devices are separately connected to adjacent USB connectors, the contact between USB memory devices
may possibly lead to failure or damage.
Never try to remove the external memory device while the external memory is being accessed. A critical failure may occur.
To Next Page
Loading...
Need help?
General
