Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Windows
29
1
Before Operation
Vision System FH/FZ5 Series
User’s Manual (Z340)
Main Window (Layout 0): Adjustment Window (Default)
You use this window to set up a measurement process and perform test measurements to confirm whether the
measurements are processed as intended.
Based on the results of the test measurement, move to the property settings for each processing unit and make
adjustments.
When the Main Window (layout 0) is being displayed, measurement results are not output and the RUN signal
remains OFF. (Layout modification can be used to change the layout.)
You can manually execute or stop test measurements.
If the measurement results are stable, switch to the Main Window (layout 1) and perform measurements.
Names of the Parts of the Main Window (Layout 0): Adjustment Window (Default)
1. Judgement Pane
• Overall Judgement Result
The overall judgment (OK/NG) for the scene is displayed.
This is the overall judgement result for the entire scene. If any processing unit that is reflected in the
overall judgement returns NG, the overall result is NG.
*1: The judgement results for individual processing units are displayed in the Detail Result Pane.
Use the following procedure to change to Main Window (layout 1).
Select [Switch layout] from the [Function] menu (default layout).
Note
3. Toolbox Pane
This button displays the edit flow window.
4. Measurement Pane
7. Flow Display Pane
6. Detail Result Pane
The Properties
Tab Page is
displayed.
2. Information
Pane
1. Judgement
Pane
5. Image
Pane
(Reference: p.32)
(Reference:
p.34)

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English