Table 6-7 Client Access Network Configuration Worksheet
Item Entry Description and Example
First Client Access IP
Address (BOND1)
First IP address in the
sequential range used for
client access network
interfaces. This network
must be distinct from all
other networks on the
Exalogic machine.
For information, see IP
Address Requirements.
Subnet mask Subnet mask for client access
network.
Example: 255.255.252.0
Gateway IP address Gateway IP address for the
client access network.
Example: 172.16.8.1
6.9.4 Private InfiniBand Network Configuration Worksheet (Required)
The private InfiniBand network is used for fabric consolidation of inter-processor
communication, network and storage. It is optimized for cluster and storage traffic.
Table 6-8 is the client access network configuration worksheet. Fill out this worksheet
and provide it to the Oracle representative, or use as a reference to complete the initial
configuration of your Exalogic machine. Information entered in this worksheet is used
as input to Oracle Exalogic Configuration Utility. This worksheet includes
fields in the Exalogic Configurator spreadsheet that typically require data.
Table 6-8 Private InfiniBand Network Configuration Worksheet
Item Entry Description and Example
First Private InfiniBand IP
Address (BOND0)
First IP address in the
sequential range used for
private InfiniBand network
interfaces. This network
must be distinct from all
other networks on the
Exalogic machine.
For information, see IP
Address Requirements.
Subnet mask Subnet mask for the private
InfiniBand network.
Example: 255.255.192.0
Gateway IP address Gateway IP address for
private InfiniBand network.
Example: 172.16.8.2
Network Configuration Worksheets
Understand Network Requirements and Configuration 6-19
To Next Page
Loading...
Need help?
General
