20
Stereo reception with the built-in analogue tuner
The built-in Tuner can detect and
receive NICAM stereo broadcasts
automatically.
Note:
In case of bad reception, the stereo
sound also can be disturbed.
NICAM stereo sound reception:
1
Select NICAM, then press ENTER.
Press
or to select AUTO or
OFF.
Select OFF if you do not want to
receive NICAM sound.
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
SURROUND OFF
RESET
AUTO
2
Press EXIT to return to the normal screen.
The following types of broadcast are possible with
NICAM transmissions
‘NICAM ST’ illuminates for approx.
4 seconds when a NICAM STEREO
broadcast signal is received.
‘NICAM M1’ illuminates for approx.
4 seconds when a NICAM MONO A
broadcast signal is received.
‘NICAM M1/M2’ illuminates for
approx. 4 seconds when a NICAM
MONO A and MONO B broadcast
signal is received.
This will be displayed for approx.
4 seconds if a NICAM signal is
received when the ‘NICAM OFF’
option is selected.
Stereo reception in Germany
‘STEREO’ illuminates for approx. 4
seconds when a STEREO broadcast
signal is received.
When 2-channel sound reception is available, you can
select your preferred audio with the AUDIO I/II button.
Each time you press AUDIO I/II, the sound channel will switch
to the alternative channel available.
NICAM 2-channel sound reception (not available in
Germany)
NICAM M1/M2
NICAM M1/M2
2-channel sound reception in Germany
SOUND 1 / 2
SOUND 1 / 2
NICAM M1
NICAM OFF
NICAM M1 / M2
NICAM ST
STEREO
32W0346A_ENG.indd 2032W0346A_ENG.indd 20 5/28/07 9:40:20 AM5/28/07 9:40:20 AM
To Next Page
Loading...
Need help?
General
