Orion TV20RN10D User Manual

39
Common Interface
You can access the Common
Interface module information from
this menu option.
Preparations
Insert CAM into the DVB Common Interface slot on the backside
of the TV (see page 10).
1
Press DIGITAL MENU, the menu will appear on the screen.
Press
or to select Common Interface option, then
press ENTER.
ecafretnI nommoCu n em niaM
A C
B
AC
B
2
The CAM module name will be displayed. You have to press
ENTER to view further information.
Cl Module
Module Name
Top Up TV
Enter Exit
3
In the CI Menu, CAM specific information such as Module
information, Smart card information, Language and
Software Download are shown.
Press
or to select information, then press
ENTER to see detail.
Cl Menu
Main menu
Module information
Smart card information
Language
Software Download
Press Ok to select, or Exit to quit
Navigate
4
Press EXIT to return to the normal screen.
Note:
If you remove the CAM module in the digital TV mode then ‘CAM
module has been removed’ will be shown on the screen.
If you enter into the Common Interface menu when the CAM is
not inserted then ‘No CAM Found’ will be displayed.
32W0146A_ENG.indd 3932W0146A_ENG.indd 39 6/8/07 11:03:37 AM6/8/07 11:03:37 AM

Orion TV20RN10D Specifications

General

Brand	Orion
Model	TV20RN10D
Category	TV
Language	English