21
Bass, Treble and Balance/Using the surround sound feature/
Brightness, Contrast, Colour and Sharpness
Notes:
To reset BASS, TREBLE and
BALANCE to the factory preset
values, select RESET in step 1 then
press ENTER.
To reset BRIGHTNESS, CONTRAST,
COLOUR, TINT and SHARPNESS
to the factory preset values, select
RESET in step 1 then press ENTER.
•
•
Bass, Treble and Balance
1
Select BASS, then press ENTER.
Then press
or to adjust the
bass.
If you wish to set the treble or
balance, press
or to
select TREBLE or BALANCE.
You can then adjust these in the
same way.
25
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
SURROUND OFF
RESET
25
BASS
2
Press EXIT to return to the normal screen.
Using the surround sound feature
The SURROUND feature processes the audio signal to
expand the listening field wider and deeper to create a ‘pseudo
surround-sound’ from the TV’s speakers. The feature works with
stereo signals from TV broadcast or AV input.
1
Select SURROUND, then press
ENTER.
Then press
or to select ON
or OFF.
OFF
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
SURROUND OFF
RESET
2
Press EXIT to return to the normal screen.
Brightness, Contrast, Colour and Sharpness
1
Select BRIGHTNESS, then press
ENTER. Then press
or to
adjust the brightness.
If you wish to set the contrast,
colour, tint, or sharpness, press
or to select CONTRAST,
COLOUR, TINT, or SHARPNESS.
These can all be adjusted in the
same way.
The “TINT” option can be selected
if an NTSC 3.58MHz or NTSC
4.43MHz signal is input through
one of the AV sockets, and NTSC or
AUTO has been selected for the AV
COLOUR option (see P.46).
PICTURE PREFERENCE
STANDARD
BRIGHTNESS 25
CONTRAST 40
COLOUR 25
TINT
SHARPNESS
25
0
0
25
BRIGHTNESS
2
Press EXIT to return to the normal screen.
32W0146A_ENG.indd 2132W0146A_ENG.indd 21 6/8/07 11:03:33 AM6/8/07 11:03:33 AM
To Next Page
Loading...
Need help?
General
