44
DVD Player
(SCART cable, not supplied)
TV (Left side view)
Decoder
(All illustrated SCART cables and antenna cables are not supplied)
ANT
AV1
AV2
Satellite antenna
DEC
VCR
TV
DVD player
Satellite
receiver
Video recorder
Antenna
TV (Left side view)
TV (Back side view)
Connection to other equipment
1. Connecting other units to your TV
Caution. Before connecting:
• Make sure to disconnect the appli
ance from the power supply in order
to avoid any potential damage from
occurring.
• Make sure to establish the required
connection.
• Make sure that connections are
properly and correctly attached before
connecting the appliances to the
power supply.
2. Connecting a DVD player
Note:
S-Video signals can be played back through the AV2 input (see P.45).
For to ensure optimum picture quality,
select RGB for the DVD player’s output
signal (see Owner’s manual of the DVD
player). AV1 SCART is compatible with
RGB signal. Select AV1 input mode to
view (see P.12).
32W0346A_ENG.indd 4432W0346A_ENG.indd 44 5/28/07 9:40:33 AM5/28/07 9:40:33 AM