22
DNR/Blue back/Rec screen status (LCD Power on/off)
DNR
Sometimes it is not possible to input a high-quality TV signal.
The actually inputted signal is noisy, e.g. a noisy, analogue cable
TV signal. DNR can somewhat improve any interference caused
by the faulty input signal.
1
Select DNR, then press ENTER.
Then press
or to select OFF,
LOW, MEDIUM or HIGH.
OFF
DNR OFF
COLOUR TEMPERATURE
MEDIUM
BLUE BACK
RESET
OFF
OFF
DNR
2
Repeat step 1 to set other values, or press EXIT to return to
the normal screen.
The interferences from the imput are suppressed most if
HIGH is set. This could result in side-effects such as loss of
sharpness and smearing.
Blue back
You can set the TV to automatically change to a blue screen and
mute the sound if the signal is weak or absent.
1
Select BLUE BACK, then press
ENTER.
Then press
or to select ON
or OFF.
OFF
DNR
COLOUR TEMPERATURE
MEDIUM
BLUE BACK
RESET
OFF
OFF
2
Press EXIT to return to the normal screen.
Rec screen status (LCD Power on/off)
This function is used in conjunction with the Timer function that
is included as part of the Digital EPG. It determines whether the
TV screen switches on or not when a programmed Timer setting
begins - see page 45 for further details.
1
Select REC SCREEN STATUS, then
press ENTER.
Press
or to select ON or OFF,
then press ENTER.
OFF
REC SCREEN STATUS
OFF
2
Press EXIT to return to the normal screen.
32W0346A_ENG.indd 2232W0346A_ENG.indd 22 5/28/07 9:40:22 AM5/28/07 9:40:22 AM
To Next Page
Loading...
Need help?
General
