22
Basic
VQT5B20 (ENG)
Taking a Still picture
• Set the drive mode to [ ] (single) by pressing 4().
1
Select the Recording Mode. (P24)
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
• When the image is correctly focused, the
picture will be taken, since the [Focus/
Release Priority] is set initially to [FOCUS].
3
Press the shutter button fully (push it in
further), and take the picture.
DMC-GX7K&GX7GN-VQT5B20_eng.book 22 ページ 2013年7月22日 月曜日 午後2時50分