Panasonic Lumix DMC-GX7K User Manual

55
Recording
(ENG) VQT5B20
Applicable modes:
1
Select the menu.
2
Press 3/4 to select the item and then press [MENU/SET].
• Exit the menu after it is set.
Using the Optical Image Stabiliser function of this unit
If your lens does not support the Optical Image Stabiliser function or is not based
on the Micro Four Thirds System standard/Four Thirds System standard, the
Optical Image Stabiliser of this unit can be used. (P53)
•
The Optical Image Stabiliser of this unit works only when taking pictures.
If your lens is not based on the Micro Four Thirds System standard/Four Thirds
System standard, make the following settings:
•
Set the [Shoot w/o Lens] to [ON]. (P83)
• Set the focal length of your lens in [Focal Length Set]. (P56)
– If a lens not based on the Micro Four Thirds System standard/Four Thirds System standard
is in use when the Optical Image Stabiliser of this unit is available, a confirmation message
for the focal length setting is displayed after this unit is turned on. Selecting [Yes] enables
you to set [Focal Length Set] in [Stabilizer].
[MENU] > [Rec]>[Stabilizer]
Item Description of settings
[Operation
Mode]
[]
([Normal])
Vertical and horizontal shake are compensated for.
[]
([Panning])
Camera shake is corrected for up/down movements. This
mode is ideal for panning (a method of taking pictures
which involves turning the camera to track the
movements of a subject which continues to move in a
fixed direction).
[OFF]
[Stabilizer] does not work.
[Focal
Length Set]
¢
The focal length of your lens can be set or registered.
¢ This item can be set only when your lens is not based on the Micro Four Thirds System
standard/Four Thirds System standard.
DMC-GX7K&GX7GN-VQT5B20_eng.book 55 ページ ２０１３年７月２２日 月曜日 午後２時５０分

Panasonic Lumix DMC-GX7K Specifications

General

Brand	Panasonic
Model	Lumix DMC-GX7K
Category	Digital Camera
Language	English