46
Recording
VQT5B20 (ENG)
• If the front dial or rear dial is rotated, the display can be enlarged/reduced up to approximately
3 to 6 times when the enlarged display is in a windowed display or up to approximately 3 to 10
times when the enlarged display is in a full screen display. The rear dial enlarges/reduces the
size at a rate of 1 time, and the front dial enlarges/reduces it at a rate of 0.1 times.
• The display can also be enlarged/reduced by pinching out/pinching in.
∫ Moving the enlarged area
•
The enlarged area can be moved by dragging the screen (P12), or pressing the cursor button.
• The following will return the MF assistance to the original position.
– Pressing [DISP.] when the setting screen for determining the area to be enlarged is displayed.
∫ Closing the MF Assist
•
It will close when the shutter button is pressed halfway.
• You can also close MF Assist by pressing [MENU/SET] or touching [Exit].
• When displayed by moving the focus lever or rotating the focus ring, it is closed approximately
10 seconds after operations are stopped.
Fixing the Focus and the Exposure (AF/AE Lock)
Applicable modes:
This is useful when you want to take a picture of a subject outside the AF area or the
contrast is too strong and you cannot achieve appropriate exposure.
1
Align the screen with the subject.
2
Press and hold [AF/AE LOCK] to fix the focus or exposure.
• If you release [AF/AE LOCK], AF/AE Lock is cancelled.
• Only the exposure is locked in the default setting.
3
While pressing [AF/AE LOCK], move the
camera as you compose the picture and then
press shutter button fully.
A AE Lock indication
• When [AE LOCK] is set, after pressing the shutter button halfway to focus, press the
shutter button fully.
2
00
606060
1.71.71.7
AELAEL
00
DMC-GX7K&GX7GN-VQT5B20_eng.book 46 ページ ２０１３年７月２２日 月曜日 午後２時５０分
To Next Page
Loading...
Need help?
General
