Pantum BM5100ADN Series User Manual

91
8. Copying
8.1. Copying function
Copy
Instructions
Common
copying
Original Size
Set the paper size of the originals.
Copy To
Set the paper size and type of the specified tray.
Multipage
Print a multi-page document to a piece of paper.
Clone
Print several identical images to a piece of paper.
Poster
Print a one-page original to pieces of paper.
Collated copy
Collate copies of an original.
Duplex copying
It supports manual duplex copying for originals.
Image quality
Set the definition mode to improve the copying effect.
Intensity
Adjust deep-light copying effect by setting intensity.
Resizing
Reduce or enlarge the size of image copied.
ID card copying
Arrangement mode
Set the arrangement mode of ID card to be copied.
Paper Size
Set the paper size.
Intensity
Adjust deep-light copying effect by setting intensity.
Receipt copying
Intensity
Adjust deep-light copying effect by setting intensity.
Paper Size
Set the paper size.
8.2. Copying method
1. Press “copying key"/"ID card copying key”/"receipt copying key” on control panel.
2. Put an original into the ADF with its front upward (only for plain copying) or on the glass
platen with its front downward. (For how to put an original, please see Chapter 2.5.)
3. Set copying quantity with “direction or number key” according to types (99pieces at
maximum).
4. Press “Startup key” for copying.
5. If the original is put on the glass platen, the printer will give a prompt of "Scan the Next Page"
after scanning one page. If the next page exists, please remove the original scanned and put
the next page on the glass platen; then, press "Start". After all pages have been scanned,
please press "OK".
8.3. Copying cancel
Press “cancel key” on control panel if canceling copying.

Pantum BM5100ADN Series Specifications

General

Brand	Pantum
Model	BM5100ADN Series
Category	Printer
Language	English