• Please put the paper or document on the scanner glass after the glue, ink or correction
fluid are completely dried.
• Rough textured, uneven, oil stained and extremely smooth paper will make printing effect
poor.
• Please make sure that there is no dust, fluff, etc. on the paper.
• Paper shall be put on a flat surface and stored under a cool and dry environment.
• To avoid influencing the definition, please don't open the scanner cover during
scanning with the platen.
2.5.2. Scan with the automatic document feeder (ADF)
1. Put the original into the ADF with its front upward and top fed first.
To Next Page
Loading...
Need help?
General